Hi
Update on price and conditions.
Price reduced to 1000€ and if you want you can take it apart on the spot and leave the rest.
Hi
Update on price and conditions.
Price reduced to 1000€ and if you want you can take it apart on the spot and leave the rest.
Hi
Just so you do not have to read the hole description, the car is in Denmark and has to be collected by buyer, price is 1400€.
I want to sell my S202 1999 Benzin Automatic with 440000km, the car has rust all the usual places, leaking head gasket (I have driven it like that for 9 years) and a unspecified knocking sound from engine (driven it for 1.5 years), gearbox shifts very smoothly, but I only consider the car to be a means of transportation for the fantastic interior and the sommer and winter rims and tyres. There is also a complete standard interior and dashboard in curly wood, a spare starter, generator, ac pump, windshield wiper complete, a Panzerplatte (under Engine) and a hole lot of bits and pieces.
As you can see the interior is in fine condition (it is from a W202) the double DIN radio with navigation is a Pioneer AVIC-F900BT with rear view camera, Pioneer does no longer provide updated maps, but updated maps can be bought on Ebay. The Webasto with remote controller Telestart T100HTM, the unit needs a new heater sponge I think.
The sommer rims is AMG 17" all with 7mm thread, the winter tyres is 15" in fine condition, thread 6mm 6mm 5mm 5mm,
Feel free to ask questions.
Kind regards
Margon
Hi
It started about a year ago when I got an oil change and they put 5w30 long life oil in it ( or maby because of Murphys Law).
before hydrostossel change it was sometimes quiet, and now (after only 20km with new hydros) it is some times louder than other times.
Kind regards
Margon
Hi
New ide about what is wrong, I think that one of the small canals for supplying the hydrostossels with oil pressure is maby blocked.
Kind regards
Margon
Hi
They came preoiled, and as before it only sounds as there is one, maby I will do a frequency analysis to figure out if it is equal to engine rpm or half of that, it sounds to me it is half engine rpm.
Kind regards
Margon
Hi
I dont think it is a rod bearing, the noise has changed a little bit after new hydrostossels, but now I have no ide about where in the head it comes from.
Kind regards
Margon
Hi
Advancer seems to be working fine.
16 new hydraulic valve adjusters, and still the same ( almost ) noise, and now it is there all the time.
Kind regards
Margon
Hi
I have now checked if the advancer says something, and it does not change the sound wether the power to it is connected or not. so it is the hydraulic lifters that makes the knocking noise.
Haynes manual have a good explanation and pictures of the camshaft advancer, but I dont think it is ok to copy it to here.
I friend still have to check the advancer to se what maked it stand inbetween on and off with engine turned off.
Kind regards
Margon :smoke:
P.S. I do understand and speak German, but when it comes to writing, I find it easyer to write in English, sorry.